They usually contain a quantity of valuable metals except for blast furnace slag and they are actually a secondary resource of metals. By applying mineral processing technologies, such as crushing, grinding, magnetic separation, eddy current separation, flotation and so on, leaching or roasting, it is possible to recover metals such as Fe, Cr ...Get Price
Aug 01, 2013 The RO phase content in the coarse fraction is 2.3 times greater than that of the fine fraction after air classification by a swirling separator. Since the RO phase belongs to a medium magnetic mineral, and the associated minerals belong to non-magnetic minerals, the RO phase can be separated by a magnetic separator with medium magnetic intensity.
UMP permanent overhead suspension magnets from STEINERT have been successfully deployed for decades, mainly in semi-mobile systems – anywhere where electricity is scarce or short working distances are required. Our STEINERT UMP offering therefore extends from small, compact magnetic separators for semi-mobile use up to large magnetic separators, which can be equipped with …
Oct 04, 2018 Magnetic Separation and Iron Ore Beneficiation. Magnetic separation is an old technique for the concentration of iron ores and for the removal of tramp iron. Since 1849, a number of patents on magnetic separation have been issued in USA, and texts of some of the patents before 1910 describe a variety of magnetic separators for mineral processing.
Heavy Element Radioactive Material Electron-Magnetic Separator, , used for the separation of radioactive isotopes, in England. An engraving depicting a rotary magnetic separator, capable of extracting ferrous metals from up to 4 tons of rubbish per hour.
*Capacity range in specific weight of the materials. Note: Technical data specification subject to change. Special electrostatic drum separator can be made on request, Please send us your technical data and application, required for our engineers to provide.; Since we are engaged in manufacturing as well as in offering turnkey projects to our customers, we pay utmost attention to customer's ...
Nov 16, 2016 The application of magnetic separation is the use of a variety of minerals or materials magnetic difference, in the magnetic force and other forces to choose other process.
In the case of high carbon (HC) FeCr slag, a Cr up-concentration by a factor of more than three (from 9 wt.% to 28 wt.%) can be achieved on the as received slag, after a single dry low intensity magnetic separation step, due to the well-liberated Cr-rich compounds present in this slag. After gravity separation of the HC FeCr slag, a fraction ...
Aluminium salt slag recycling. Eddy current separators enable efficient recovery of the aluminium granules of aluminium salt slag. Since most of the aluminium is present in the fine and ultrafine 3 mm fractions, particularly high-frequency, specially adapted STEINERT EddyC non-ferrous metal separators must be used.
Rare Earth Tubes : Rare Earth Magnets are used to remove Iron Contamination from liquid or dry bulk material for quality control check. Our Magnetics Tubes are available in Standard length of 150, 200 and 300 mm with solid, threaded or with studded ends.
Sep 10, 2018 Grinding, sieving and magnetic separation were combined to recover metallic iron from the converter slag, and yielded approximately 41.5% of iron in which the iron content was as high as 85%, and the non-magnetic concentrate contains 8.56% vanadium with a yield of 95.3% and 8.63% titanium with a yield of 85.3%.
• Metallurgically modified slag Following coarse slag processing (recovery of metal e.g. + 20 mm, crushing of the mineral components to -20 mm) by means of crush-ing, screening and sorting technologies such as handpicking, sen-sor sorting, magnetic separation and/or dry density separation, a pre-crushed slag fraction is fed into the Loesche mill.
dry magnetic separation of bulk slag, wet stage grinding and magnetic separation, wet magnetic separation for full grain level, fine-grained level flotation, and gravity separation [7-9]. The wet separation and electromagnetic separation technologies suffer from high power and water consumption, whereas by contrast, dry permanent
They usually contain a quantity of valuable metals except for blast furnace slag and they are actually a secondary resource of metals. By applying mineral processing technologies, such as crushing, grinding, magnetic separation, eddy current separation, flotation and so on, leaching or roasting, it is possible to recover metals such as Fe, Cr ...
Copyright © 2021.Henan Mining Machinery Co., ltd. All rights reserved. Sitemap